ROTARY FURNACE LINING TO REDUCE THERMAL STRESS

Authors

Zamira MUKHAMEDBAEVA, Tashkent Chemical-Technological Institute, Tashkent, UzbekistanFollow
Erkin KURBANOV, LLC "NAMANGANTSEMENT", Namangan, UzbekistanFollow
Abduvali MUKHAMEDBAEV, LLC "ANTENN-BRANCH", Tashkent, UzbekistanFollow

DOI

10.51348/NFFV7184

Abstract

The aim of the study is to reduce the thermal stresses of the lining in the areas adjacent to the flare sintering zone of rotary kilns intended for the production of cement clinker. It is proposed to use a lining made of parallel rows of alternating chamotte and chromium-magnesite refractory products to reduce thermal stresses in the areas adjacent to the flare sintering zone by up to 20%, increase the service life of the lining by 1.1-1.2 times as a result of equalizing thermal stresses in the areas of the sintering zone. Optimization of the initial raw material mixture, in turn, made it possible to reduce the temperature of clinker formation and led to fuel savings.

Recommended Citation

MUKHAMEDBAEVA, Zamira; KURBANOV, Erkin; and MUKHAMEDBAEV, Abduvali (2021) "ROTARY FURNACE LINING TO REDUCE THERMAL STRESS," CHEMISTRY AND CHEMICAL ENGINEERING: Vol. 2021: No. 3, Article 10.
DOI: 10.51348/NFFV7184
Available at: https://cce.researchcommons.org/journal/vol2021/iss3/10