FEATURES OF FORMATION OF THE STRUCTURE AND PROPERTIES NONFRITTED GLAZES FOR SANITARY CERAMIC PRODUCTS

Authors

• Ivan A. LEVITSKII, Belarusian State Technological University, Minsk, BelarusFollow
• Mihail V. Dyadenko, Belarusian State Technological University, Minsk, BelarusFollow
• Valery G. LUHIN, Belarusian State Technological University, Minsk, BelarusFollow

Abstract

The results of research on the formation of nonfritted glass-ceramic coatings for sanitary ceramic products are presented. The synthesis was carried out in a multicomponent raw material mixture including pegmatite, chalk, quartz sand with a constant content of zirconium silicate, talc, wollastonite, zinc whitewash, refractory clay and kaolin. Glazes were obtained by single firing at a temperature of 1200±5 °C for a duration of 20 hours. Samples of coatings were obtained, the processes of glaze formation were studied, the fusibility of glazes was assessed, and their physico-chemical properties were studied in relation to the features of the formation of the structure and phase composition.

Recommended Citation

LEVITSKII, Ivan A.; Dyadenko, Mihail V.; and LUHIN, Valery G. (2026) "FEATURES OF FORMATION OF THE STRUCTURE AND PROPERTIES NONFRITTED GLAZES FOR SANITARY CERAMIC PRODUCTS," CHEMISTRY AND CHEMICAL ENGINEERING: Vol. 2026: No. 2, Article 3.
DOI: https://doi.org/10.70189/1992-9498.1724
Available at: https://cce.researchcommons.org/journal/vol2026/iss2/3